| Subject | Text |
| Re: Samsung scx-4300 problem after tonner refilling | try this solution:...chip resetter samsung scx 4300 scx 4300 toner exhausted firmware scx 4300 scx 4 |
| thomson 21mg76cl | Hallo ! I have tv thomson 21mg76cl. television with normally button-down ,but haywire buttons and no |
|
|
| In Italy 100n is 100 nF (100 nanoFarad) " C " is "Ceramic". Other numbers will be Part numbers. |
| philips tv | the fault on your philips tv is probably ic7064. also known as the painter ic, on the small signal b |
| Could still be corrupted | daveyd "... It was kinda funny, before I did the reset, some of the color settings said they we |
| your hdtv | hello again,
you seem to be a smart person ! Indead ,repair and service cost the client a lot of |
| After 46 years servicing electronics, there is one thing that never fails to amaze me. A customer w |
| Buy nokia n90,n70a at$200.00, sony ericson p900 | FOR SELL MOTOROLA RAZOR V3 MOBILE PHONE AT JUST $130usd, FOR SELL MOTOROLA RAZOR V3x MOBILE PHONE AT |
| bad capstan motor. Less than $100 part. |
| Thanks vtech,
yeah, I had thought that Lxx would denote an inductor of some sort though I thought |
| inverter boards for sale | I have 2 inverter boards-6632L-0283A,6632L-0282A.They areLC370WX1,Master and Slave.From a working Ma |
| Studioworks 775n (CB775BN) brightness adjustment??? | Hi all,
My monitor brightness controll is 100% on the OSD & my monitor is still darker than it |
| Mitsu CS 35401 old 35" TV problem | I got a Mitsubishi 35" CS35401 television that will only stay on for about 30 seconds before going b |
| Zenith ZB4683RK convergence problem | Hello, If you look at the pics at
http://webpages.charter.net/jenglish_tnx/
you will see what I s |
| Function of inverter on lcd display | Can anyone explain to me what the purpose/function of inverter is in an lcd display. I have a hunch |
| Re: Please help : My Panasonic television isn't well at all! | [quote:f7573fb424="ArthurLee"]
My questions are
Does this sound feasible (ie dry joints)?[/quot |
| a10e | fault is probably the micro on the small signal panel ic7064, enter the service mode check the softw |
|
|
| ok..1st try resoldering the vertical section for possible loose connection 2nd try replacing capacit |
| Re: Toshiba 21F8XEU TV service menu | [quote:b9b23b6ae6="Anonymous"]Hi I need the procedure to enter the service menu for Toshiba 21F8XEU |
| Re: 37mf321d/37 | [quote:0580990249="Dan the Tv man"]Ive got a main board(scaler) Ill sell you for $100 plus flat rate |
| blue screen white horizontal lines AWA tv model w571 | hi
i have similar problem with my awa tv. I get a blue screen with white horizontal lines it's been |
| Sanyo | You probably have a bad tuner or bad solder joints in the tuner area. Depending on what they find a |
| Spectroniq PLTV-3250 wont start | Hello
I am working with a spectroniq (proton) model PLTV-3250
LCD TV. The set will not start I fo |
| Vauxhall Triple Display Unit Problem? | I have just bought a new triple display unit for my 02 Astra Convertible as you could not read the o |
| If you've already replaced the capacitors (better spelling as "capacitators" :D ) and the power sup |
| 50MP1 | Hello Stiff,
Yes these are 100% fixable, each fault plasma will require 2 SMD capacitors removing |
| W280NS | reduced horizontal raster , C71 charred , manual gives this as 1Uf 100 V , and C68 , manual gives th |
| check R704 value can vary depending on model usuall 100 ohm |
| sorry | Hi!!!
For mi ok 100 files max.
Tanks for all,plamensl good site !! |
| tv | Hallo ! I have tv thomson 21mg76cl. television with normally button-down ,but haywire buttons and no |